Mounting Presentation Boards

No matter what base you use for mounting your artwork you should always do the following;

- If you need to cut images out use a scalpel and a RULER.
- Make sure all your edges are straight and corners are at right angles.
- Mark out on the board with a ruler where your page will sit.
- Put one strip of double-sided sticky tape on the left and right edges of the card 
(for landscape, top and bottom for portrait).
- Peel away the covering of one of the strips to reveal the sticky edge.
- Stick one edge of the paper down in place.
- Once one edge is in place, stake the coating of the other edge of double sided tape.
- Before you stick the page down, spay Spray Adhesive on the card and gently lay the paper on the card.
- Using the back of your hand smooth the paper onto the card and double sided tape 
(make sure there are no air bubbles).
- Let your board dry.
- Once you have finished, write your name and student number on the back of each board.
- Now you are ready to start designing!